Product NewsAPE1911MPAPEC is launching a high efficient, single channel, 500KHz Asynchronous Boost Converter IC, APE1911MP. The high side N channel MOSFET is built inside; hense the application circuit is simple, it only requires inductor and diode for external components. The component counts is less to reduce the PCB board size. The soft start time of APE1911MP is adjustable by adjusting the capacitor value. The purpose of using this function is to avoid the overshoot when chip is turned on. This part can be widely used in lots of applications like LCD/PDP Power, Networking, Panel, Battery Power system. The APE1911MP accepts maximum 20Volts Vin and 32Volts maximum voltage output. The enable function is built in. The chip fuction blocks include Bandgap, Error Amplifier, OTP, OCP and support speedy transient response. The OTP and OCP to ensure the chip is fully protected under all kinds of abnormal conditions. APE1911MP is a chip with low cost, high stability, high efficiency Asynchronous PWM Converter IC. The N MOSFET is built in ; it can help to to reduce the cost. The PB free sample is available now. APE1802APEC is launching an high efficient, single channel, 330KHz Asynchronous Buck Converter IC. The high side P channel MOSFET is built inside and make the application design more easier. It is suitable for PDP, LCD TV power, Networking power or the other power systems which requires the current loading smaller than 3.5A (eg. 12Vin to 5Vout or 5Vin to 3.3Vout). The APE1802 can be operated in a wide range input voltage from 3.3Volts to 23Volts. The internal high switching frequency can help to reduce the power dissipation. The output voltage can be lower to 0.8Volt. The enable function supports the energy saving requirement. The OCSEST pin can set the OCP point. The protection functions includes Short Circuit Protection and OTP. APE1802 is a chip with low cost, high stability, high efficiency Asynchronous PWM Converter IC. The high side P MOSFET is built in ; it can help to minimize the board size. The PB free sample is available now. APU3146
Advanced Power Electronics Corp. recently introduced a new pulse width
modulated (PWM) dual synchronous buck controller APU3146. This is a driver IC
for point-of-load (POL) buck converters. Typical applications include dual phase
ASIC and DDR memory power management circuits, datacom, telecommunications, PC
Power related power supplies requiring multiple outputs. The product features for APU3146 include..
AP30G120WAPEC fast series of Insulated Gate Bipolar Transistors (IGBTs) provide low conduction & switching losses. AP30G120W is designed for applications such as Induction Heater & Micro Oven where high speed switching is a required feature. AP9930GMAP9930GM is specially designed for applications such as full bridge inverter & DC fan where board space and cost are to be concerned. AP1332EUAP1332EU is suitable for portable application. It's in SC70 package and also with 2KV ESD diode built-in. |
|